A&D Waterproof Digital Platform Scale HW-60KV-WP - Manual (Page 32)

Page 30 HV-WP/HW-WP Series 11. Upper/Lower Comparator Function
Step 6 If either of f6 0 , f6 2 , f6 4 , f6 6 has been
selected, press the SET switch to use the
comparator.
Step 7 Press the MODE switch to display the blinking HI.
Step 8 Set the upper limit value by using the following
switches.
∧ switch Selecting the number of a figure.
＜ switch Selecting a figure.
F switch Selecting the polarity (+,-).
Step 9 Press the ENTER switch to store the new
parameter and display the blinking LO.
Step 10 Set the lower limit value by using the following
switches.
∧ switch Selecting the number of a figure.
＜ switch Selecting a figure.
F switch Selecting the polarity (+,-).
Step 11 Press the ENTER switch to store the new
parameters and display the weighing mode.