A&D Waterproof Digital Platform Scale HW-60KV-WP - Manual (Page 16)

Page 14 HV-WP/HW-WP Series 6.2. Switches
Display and Symbols Meaning A
An error where the weighing value is unstable due to
drift, vibration or other, when turning on the scale.
Check around the weighing pan.
Check the connection of load cell cable.
A
A
A
A
Remove anything that may be on the weighing pan.
Check around weighing pan.
Perform zero point calibration of the scale.
A
A
A
Error indication.
Refer to "19
Maintenance ".
A
A
A
Accumulated data count.
A
A
Total mass value of the accumulated data.
A
A
Comparator function, display is an upper limit.
Full/dribble batch function, the display is a final value. A
A
Full/dribble batch function, the display is a preliminary
value. A
A
Comparator function, display is a lower limit.
Full/dribble batch function, the display is the zero band. A
A
CAP. MAX. 3/6/15kg d=1/2/5g
Description of the weighing unit, weighing range and
measurable minimum mass. A
A
6.2. 6.2. 6.2. 6.2. Switches Switches Switches Switches
Display and Symbols Meaning A
Display ON/ OFF switch.
Note Standby status when power is connected.
A
A
A
Zero switch.
When there is nothing on the weighing pan and the
ZERO
switch is pressed, the scale displays the mass value of zero
and the zero point mark. Net is canceled, if it is displayed.
A
A
A
A
Tare switch.
Canceling the mass of a receptacle, case, bag, etc. which is
put on the weighing pan, and does not weigh its mass.
A
A
A
Range switch, Sample switch.
Changing weighing range for HV-WP series.(Refer to f2 )
Storing the unit mass, it is used to select a sample number.
In the function table, it is used to select a parameter.
A
A
A
A