Nikon COOLPIX P500 User Manual
Page 92
78
Continuous Shooting (
j, k, l, m Mode)
More on
Sh
ooting
B
Notes on Continuous
• Flash cannot be used during continuous shooting (except for interval timer shooting). The focus,
exposure, and white balance settings are fixed at the values for the first picture in each series.
• It may take some time to save the images after shooting. The amount of time it takes to finish
saving the captured images depends on the number of images, image quality, image size, the write
speed of the memory card, etc.
• When ISO sensitivity increases, noise may appear in captured images.
• The speed of continuous shooting may decrease depending on the image quality, image size, type
of memory card used, and shooting conditions.
• When continuous is set to Pre-shooting cache, Continuous H: 120 fps, Continuous H: 60 fps
or Multi-shot 16, banding or variance in brightness or hue may occur in images that were
captured under lighting that flickers at high speeds, such as fluorescent, mercury-vapor, or sodium-
vapor lighting.
• When continuous is set to Pre-shooting cache, Continuous H: 120 fps or Continuous H: 60
fps, accurate exposure may not be achieved (images may be overexposed) in images captured on
bright sunny days.
• This feature cannot be used simultaneously with certain functions. See “Functions that Cannot be
A104) for more information.
B
Note on Best Shot Selector
BSS is suited for shooting stationary subjects. BSS may not produce the desired results if the subject
moves or the composition changes.
C
Images Captured in Continuous
Each time images are captured using Continuous H, Continuous L, Pre-shooting cache,
Continuous H: 120 fps or Continuous H: 60 fps, the captured images are saved as a “sequence”
(
A113).