Nikon COOLPIX P500 - Manual (Page 194)

180
Connecting to a Printer
Con
n
e
cti
ng t
o
Te
le
vi
sion
s, C
o
mputers and
Pri
n
ters
Connecting the Camera and Printer
1
Turn off the camera.
2
Turn on the printer.
• Check the printer settings.
3
Connect the camera to the printer using the supplied USB cable.
• Be sure that connectors are properly oriented. Do not attempt to insert connectors at
an angle, and do not use force when connecting or disconnecting the USB cable.
4
The camera is automatically turned on.
• When connected correctly, the PictBridge startup
screen (1) is displayed in the camera monitor. Then the
Print selection screen (2) is displayed.
B
If the PictBridge Startup Screen Is Not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option ( A202) in
the camera’s setup menu to Off and reconnect the cable.
32
32
NO.
Print selection
15/05
2011
1 2