Nikon D4 User Manual
Page 87
61
x
Exposure preview is not available, matrix metering is selected
automatically, and the following settings can be adjusted.
Aperture
Shutter speed
ISO sensitivity
e, f
—
—
—
g
✔
—
—
h
✔
✔
✔
Note that silent mode is not completely silent: the shutter sounds and the
mirror is raised and lowered at the start and end of live view photography.
D
The Count Down Display
A count down will be displayed 30 s before live view ends automatically
(
0 55; the timer turns red if live view is about to end to protect the
internal circuits or, if an option other than No limit is selected for
Custom Setting c4—Monitor off delay;
0 317—5 s before the monitor
is due to turn off automatically). Depending on shooting conditions,
the timer may appear immediately when live view is selected. Note that
although the count down does not appear during playback, live view
will still end automatically when the timer expires.
A
HDMI
If the camera is connected to an HDMI
video device during live view
photography, the camera monitor will
remain on and the video device will
display the view through the lens as
shown at right. Press the
R button to
turn the histogram display on and off during exposure preview (
A
See Also
For information on choosing the roles played by the center of the multi
selector and by the movie-record button and command dials, see
Custom Settings f1 (Multi selector center button,
(Assign movie record button,