Nikon D4 - Manual (Page 151)

125
Z
Exposure Mode
To determine how the
camera sets shutter speed
and aperture when
adjusting exposure, press
the
I (Q) button and
rotate the main command
dial until the desired option
appears in the top control
panel.
A
Lens Types
When using a CPU lens equipped with an aperture ring ( 0 387), lock
the aperture ring at the minimum aperture (highest f-number). Type G
lenses are not equipped with an aperture ring.
Non-CPU lenses can only be used in exposure mode g (aperture-priority
auto) and h (manual). In other modes, exposure mode g is
automatically selected when a non-CPU lens is attached (
0 388). The
exposure mode indicator (e or f ) will flash in the top control panel and
g will be displayed in the viewfinder.
A
Depth-of-Field Preview
To preview the effects of aperture, press and
hold the Pv button. The lens will be stopped
down to the aperture value selected by the
camera (modes e and f ) or the value chosen by
the user (modes g and h), allowing depth of field
to be previewed in the viewfinder.
A
Custom Setting e5—Modeling Flash
This setting controls whether optional flash units such as the SB-910,
SB-900, SB-800, SB-700, and SB-600 (
0 194) will emit a modeling flash
when the Pv button is pressed. See page 325 for more information.
I (Q) button
Main command dial
Pv button