Nikon D4 - Manual (Page 191)

165
r
4
Select direct measurement mode.
Release the U button briefly and then
press the button until the L icon in
the rear control panel starts to flash. A
flashing D will also appear in the top
control panel and viewfinder. The
displays will flash for about six seconds.
5
Measure white balance.
Before the indicators stop flashing, frame the
reference object so that it fills the viewfinder and
press the shutter-release button all the way down. The camera
will measure a value for white balance and store it in the
preset selected in Step 3. No photograph will be recorded;
white balance can be measured accurately even when the
camera is not in focus.
Top control panel
Rear control panel
Viewfinder