Nikon P1 - P2 User Manual

Page 175

163

chni
ca

l Note

PictureProject

does not start

when camera is

connected or
memory card

inserted in card

reader or card

slot

• Camera is off.
• The optional EH-62C AC adapter kit is not properly

connected, or battery is exhausted.

• UC-E6 USB cable is not correctly connected, or card

not properly inserted in card reader or card slot.

• USB in the Interface menu set to PTP when camera

connected to computer running Windows 2000 Pro-
fessional, Windows Millennium Edition (Me), or Win-
dows 98 Second Edition (SE).

• Camera is not registered in Device Manager (Win-

dows only).

See PictureProject Reference Manual (on CD) for further
information.

14
14

–

CHOOSE PRO-

FILE screen does

not appear in

Wireless transfer

mode

• Set the USB option to PTP in the Interface menu of

the setup menu.

Signal is weak

• Set host.
• Move closer to the access point.
• Remove any obstacles between the camera antenna

and computer.

• Change camera facing.

138

–

Signal was

interrupted and

picture could

not be sent

• Turn the camera off and then turn it on again.

141

Problem

Possible cause