Nikon AW120 User Manual
Page 248
F
18
T
e
chni
cal N
o
te
s
a
n
d I
n
dex
The altimeter or depth
gauge and
atmospheric pressure
icon remain displayed
on the shooting screen.
Set Photo info of Monitor settings in the
setup menu to Hide info.
Unable to display the
altimeter or depth
gauge even when
Altimeter/depth
gauge is set to On.
Even when Altimeter/depth gauge is set to
On, the altimeter or depth gauge is not
displayed in the following situations.
• When the shutter-release button is pressed
halfway
• During shooting in the Easy panorama
scene mode
• During movie recording
• When a subject is registered using Subject
tracking of AF area mode
• When a message is being displayed
–
–
Water depth shows 0
m
The water depth will be displayed as 0 m if the
camera is not submerged under water when
the Underwater scene mode is selected.
Unable to select Use
location data of Alt./
depth correction in
the Location data
options menu.
• Record location data in the Location data
options menu is set to Off.
• You cannot select this function unless
signals are received from four or more
satellites and positioning has been
performed.
• The camera is submerged under water. You
cannot select this function during
underwater shooting.
–
Unable to select
Create log in the
Location data options
menu.
Clock not set.
Set date and time.
Unable to select Start
all logs or Start
location log.
• Record location data in the Location data
options menu is set to Off.
• The camera is recording log data. To record
a new log, select End all logs or End
location log, and end the log currently
being recorded.
Problem
Cause/Solution
A