Nikon AW120 - Manual (Page 110)

80
U
sin
g
Locati
on Data Fu
nc
ti
o
n
s/
D
isp
la
y
in
g
Ma
p
s
B
Battery Drain While Recording Location Data and Log Recording
• When Record location data is set to On, record location data functions will
continue to operate at the specified interval for approximately 6 hours even after
the camera is turned off. Also, record location data functions and log recording will
continue to operate while recording logs (
A88) even after the camera is turned
off.
• When Record location data is set to On or while recording logs, the battery
power will drain faster than usual. Confirm the battery level especially when
recording a log using Start all logs or Start depth log.
C
Location Data Reception Indicator and Points of Interest (POI)
Information
• Location data reception can be checked on the
shooting screen.
-
n
: Signals are being received from four or
more satellites and positioning is being
performed. The location data is recorded on
the image.
- o
: Signals are being received from three
satellites and positioning is being performed.
The location data is recorded on the image.
- z: Signals are being received from the
satellites, but positioning is not possible. The
location data is not recorded on the image.
- y: Signals cannot be received from the satellites, and positioning is not possible.
The location data is not recorded on the image.
• POI information is location name information for the nearest landmarks (facilities)
and other details.
- When Display POI in Points of interest (POI) of the Location data options
menu ( A87) is set to On, the nearest location name information for the current
position is displayed during shooting.
- When Embed POI is set to On, location name information can be recorded on
the image during shooting.
- If the location name information was recorded on the image during shooting,
this information is displayed when Display POI is set to On during playback.
• The location name information may not be displayed depending on the setting
level in Level of detail of Points of interest (POI). Also, certain landmark names
may not be registered, or the landmark name may be different.
40
10
0
-10
30
20
1010hPa 1010hPa 1010hPa
15m 15m 15m
25m 0s 25m 0s
880 880
Location data reception
Location name information
(POI information)