Nikon AW120 - Manual (Page 216)

E 88
Re
feren
c
e
S
ect
io
n
Set Clock from Satellite
Signals from the positioning satellites are used to set the date and time of the
camera’s internal clock. Check the positioning status before setting the clock
using this option.
B
Notes About Set Clock from Satellite
• To set the camera's internal clock, positioning must have been done successfully
( A78).
• Date/time adjustment by Set clock from satellite is set according to the time
zone set in Time zone and date ( A76, E63) of the setup menu. Check the
time zone before setting Set clock from satellite.
• The date/time set using Set clock from satellite is not as accurate as radio clocks.
Use Time zone and date in the setup menu to set the time if it is not accurate in
Set clock from satellite.
Press the d button M z (location data options) menu icon M Set clock
from satellite M k button