Swiftech MCW6000 2 64 User Manual
Parts list
1.
Preparing your Motherboard
Remove the existing heat sink, and carefully clean the CPU.
Apply thermal compound: lightly coat the CPU with the provided Céramique™ thermal compound. Follow this link
for detailed instructions.
Rub some compound in base of water-
block first, and then clean off with lint-
free cloth
Apply small amount of
compound on the CPU heat
spreader
Parts list
Parts
QTY
PARTS
QTY
MCW6000™ or 6002-64™ water-block
1
Retention springs & screws
2
Worm drive clamps
2
SK8 hold-down plate
1
Céramique thermal compound
1
This product is intended for expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to
your components. Swiftech assumes no liability whatsoever, expressed or implied, for the use of these products, nor their installation. The
following instructions are subject to change without notice. Please visit our web site at
tes.
4
5
6
7
8
2
1
3
3
ITEM NO.
Q TY.
PART N O.
D ESCRIPTIO N
1
1 M C W 6000-R2
M C W 6000 flat ba se water-block
2
1 S754-RETENTIO N-r2
SK8 ho ld-down p late for AM D K8
3
1 K8_M otherboa rd
AM D K8 (Athlon 64 & Op teron) m otherb oard+ pro cessor assy.
1 counter-plate
1 m otherb oard
1 retention-fra m e
4
2 91772A158-6-32X1.75
6-32 x 1 7/8“ philips sc rew
5
2 93286A041-W A SHER
zinc pla ted wa sher
6
2 885
sprin g
7
2 spa cer-205x140x773
te nsion lim iter
8
2 6-32 nylon reta ining washer
6-32 nylon retaining washer
Figure 1
Copyright Swiftech 2004 – All rights reserved – Last revision date: 11-23-04
Rouchon Industries, Inc., dba Swiftech – 1703 E. 28
th
Street, Signal Hill, CA 90755 – Tel. 562-595-8009 – Fax 562-595-8769 - E Mail:
[email protected] – URL:
http://www.swiftnets.com
- Information subject to change without notice