Swiftech MCX603 V User Manual

Page 2

Dual processor side-by-side installation

In dual processor “side-by-side”

installations, make sure to

orient the “flat” sides of the

heatsinks towards each other

"rounded" side

"flat" side

Fan compatibility and installation (fan is not provided)

Use the provided snap-rivets to secure the fan to the bracket thru the lower lip of the fan as shown in the schematic page 1. Fans that do
not feature a lip cannot be installed with the provided snap-rivets, and will require a screw and nut to be secured to the brackets.

Recommended fans
Suggested fan airflow rating for normal use (non-overclocked processor), and operating conditions: please visit our web site

here

for a list

of recommended fans depending on the applications.

7. Final

inspection

Now that the heat sink is installed, startup your computer, go into the BIOS and observe the CPU temperature. Under normal ambient
temperature conditions, the processor temperature should never exceed 65

° C. If it does, shut down the computer immediately, and

review your entire installation. Troubleshooting help is available on our web site at

www.swiftnets.com

, or by calling customer support at

562-595-8009.

MCX603-V Installation with optional screw/spring assemblies – (part # MCX603-VSR2)

Rouchon Industries, Inc., dbA Swiftech – 1703 E. 28

Street, Signal Hill, CA 90755 – Tel. 562-595-8009 – Fax 562-595-8769

E Mail: Swiftech @swiftnets.com – URL:

http://www.swiftnets.com

Information subject to change without notice

Page 2