Blodgett DFG-100 XCEL - Manual (Page 21)

19
Operation
SSD - Solid State Digital Control
Cook with Pulse:
NOTE: PULSE light is on when pulse mode is on and off
when pulse mode is off.
1. Turn the SELECTOR SWITCH (1) to the desired posi-
tion. If high fan is chosen, high rate may be selected
by toggling the RATE SWITCH (14).
2. Enter cook time and cook temperature.
3. Press PULSE KEY (9). Enter the pulse time. A mini-
mum of one minute must be entered to operate.
NOTE: The pulse time is displayed in min:sec.
(Example 15 minutes = 15:00). Pulse time
is a portion of the cook time and does not
increase the previously entered cook time.
4. Load product into the oven.
NOTE: The display reads LOAD when the oven is
near the set temperature.
5. Push START/STOP KEY (12). The timer begins to
count down the cook time. The oven will be in pulse
mode for the set pulse time. Once the set time has ex-
pired, the unit will automatically switch to cook mode
and continue counting down.
6. When the cook timer reaches 00:00 the buzzer
sounds and the display reads DONE.
7. Push the START/STOP KEY (12) to turn the buzzer
off.
8. Remove the product.
WARninG!!
A complete five minute shutdown must be
observed before the oven is relighted.
oven Cool Down:
1. Turn the SELECTOR Switch (1) to COOL DOWN.
NOTE: The doors may be opened to speed the
cooling process.
oven Shut Down:
1. Turn the SELECTOR SWITCH (1) to OVEN OFF.