Blodgett ZEPHAIRE-200-E - Manual (Page 17)

15
Maintenance
troubleshooting Guide
PossIBLE cAUsE(s) sUGGEstED REMEDY
sYMPtoM: Elements will not heat
• Oven not plugged in.
• Power switch on the control panel is off.
• Control set below ambient temperature.
• Doors are open.
• Plug in electrical supply cord.
• Set the control panel to COOK or OVEN ON.
• Set to desired cook temperature.
• Close doors.
sYMPtoM: oven does not come to ready.
• The oven has not reached preheat temperature.
• Internal problem with main temperature control.
• Wait for oven to reach preheat temperature.
• *
sYMPtoM: convection fan does not run.
• Oven is not plugged in.
• Circuit breaker tripped.
• Doors are open
• Plug in electrical supply cord.
• Reset the breaker.
• Close doors.
sYMPtoM: General baking problems.
• Thermostat out of calibration.
• *
*Denotes remedy is a difficult operation and should be performed by qualified personnel only. It is recommended, how-
ever, that All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator.
Blodgett cannot assume responsibility for damage as a result of servicing done by unqualified personnel.
WARnInG!!
Disconnect the oven from the power supply before servicing. It is not necessary to unplug the oven when
cleaning.