Electrical safety and installation requirements, Standards: this product meets the following standa, Rfi emission en55022 class a – Allied Telesis AT-MR820T User Manual
Page 3: Warning: in a domestic environment this product ma, Immunity en50082-1, These products have been safety tested by ul to st, Safety electrical notices electric shock hazard to, Lightning danger do not work on equipment or cable, Power cord is used as a disconnection device. to d
iii
Electrical Safety and Installation
Requirements
STANDARDS: This product meets the following standards
RFI Emission EN55022 Class A
WARNING: In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Immunity EN50082-1
STANDARDS: This product meets the following standards
These products have been safety tested by UL to Standard UL 1950, CSA to CSA 950
and by TUV to EN60950.
SAFETY
ELECTRICAL NOTICES
ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove cover. No user-serviceable parts inside.
This unit contains HAZARDOUS VOLTAGES and should only be opened by a trained
and qualified technician. To avoid the possibility of ELECTRIC SHOCK disconnect
electric power to the product before connecting or disconnecting the LAN cables.
LIGHTNING DANGER
DO NOT WORK on equipment or CABLES during periods of LIGHTNING
ACTIVITY.
POWER CORD IS USED AS A DISCONNECTION DEVICE.
TO DE-ENERGISE EQUIPMENT disconnect the power cord.
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved by the manufacturer or
the FCC can void your right to operate this equipment.
Canadian Department of Communications
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appariel numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
MRx20T(UTP)Ver6_Book Page iii Thursday, April 3, 1997 5:18 PM