System status and system hardware details – Allied Telesis AR400 SERIES Software Release 2.7.1 User Manual
Page 33
Getting Started with the Graphical User Interface (GUI)
33
Software Release 2.7.1
C613-02021-00 REV F
10. Configure an IP interface to run SSL over
To configure an IP interface that SSL will be run over, first enable IP using
the command:
ENABLE IP
To make
VLAN1
the IP interface, and 172.30.1.105 the interface’s IP address,
use the command:
ADD IP INTERFACE=vlan1 IP=172.30.1.105
To add an IP route on this interface with a next hop of 172.30.1.254, use the
command:
ADD IP ROUTE=0.0.0.0 INTERFACE=vlan1 NEXT=172.30.1.254
For this example to succeed, you would have to log in as “cipher” rather than “manager”
when connecting to the router with a web browser.
System Status and System Hardware Details
The GUI opens to display the system status (system hardware details for
AR410 Series routers). Figure 5 shows the system status page for an AR450S
router, and points out key information contained on the page.
Figure 5: The System Status page of the AR450S
Model name
Help, Save and Exit
Sidebar menu
System status
Port status
Software release