Allied Telesis AR400 SERIES Software Release 2.7.1 - Manual (Page 122)

122 AR400 Series Router User Guide
Software Release 2.7.1
C613-02021-00 REV F
ADD IP INTERFACE=ETH0 IP=172.31.108.10 MASK=255.255.255.0
OSPFMETRIC=1
4. Configure router 2 as an OSPF router.
To create an OSPF area, assign the IP interfaces to the area, and configure
OSPF routing parameters, enter the command:
ENABLE OSPF
ADD OSPF AREA=0.0.0.1 AUTHENTICATION=PASSWORD
ADD OSPF RANGE=172.31.0.0 AREA=0.0.0.1 MASK=255.255.0.0
ADD OSPF INTERFACE=ETH0 AREA=0.0.0.1 PASSWORD=csecret
ADD OSPF INTERFACE=PPP0 AREA=0.0.0.1 PASSWORD=bsecret
For more information about configuring OSPF, see the Open Shortest Path First
(OSPF) chapter in the Software Reference.