Allied Telesis AT-ARW256E - Manual (Page 49)

AT-ARW256E User’s Guide
49
7. Wireless ADSL Router Terms
What is DSL?
DSL which is short for Digtal Subscriber Line is a technology that increases the digital capacity of
a ordinary telephone line into home of office and , because it is utilitsing the unused bandwidth,
the line allows normal phone usage and signal to be for broadband to be used at the same time.
DSl has the capability to impart “always-connected” services, thus eliminating the need to dial in
to the service
What is a firewall?
A firewall is protection between the Internet and your local network. It acts similarly to the firewall
in your car, protecting the interior of the car from the engine. Your car's firewall has very small
opening that allow desired connections from the engine into the cabin (gas pedal connection,
etc), but if something happens to your engine, you are protected.
The firewall in the Wireless ADSL Router is very similar. Only the desired connections that you
allow are passed through the firewall. These connections are normally originating from the local
network; such as web browsing, checking your email, downloading a file, and playing a game.
However, in some cases, you can allow incoming connections so that you can run programs like
a web server.
What is NAT?
NAT stands for Network Address Translation. Another name for it is Connection Sharing. What
does this mean? Your ISP provides you with a single network address for you to access the
Internet through. However, you may have several machines on your local network that want to
access the Internet at the same time. The Wireless ADSL Router provides NAT functionality that
converts your local network addresses to the single network address provided by your ISP. It
keeps track of all these connections and makes sure that the correct information gets to the
correct local machine.
Occasionally, there are certain programs that don't work well through NAT. Some games, and
some specialty applications have a bit of trouble. The Wireless ADSL Router contains special
functionality to handle the vast majority of these troublesome programs and games. NAT does
cause problems when you want to run a SERVER though. When running a server, please see the
DMZ section below.
What is a DMZ?
DMZ really stands for Demilitarized Zone. It is a way of separating out part of your local network
so that is more open to the Internet. Suppose that you want to run a web-server, or a game
server. Normal servers like these are blocked from working by the NAT functionality. The solution
is to "isolate" the single local computer into a DMZ. This makes the single computer look like it is
directly on the Internet, and others can access this machine.
Your machine isn't really directly connected to the Internet, and it really has an internal local
network address. When you provide the servers network address to others, you must provide the
address of the Wireless ADSL Router. The Wireless ADSL Router "fakes" the connection to your
machine.
You should use the DMZ when you want to run a server that others will access from the Internet.
Internal programs and servers (like print servers, etc) should NOT be connected to the DMZ
What is a Gateway?
The Internet is so large that a single network cannot handle all of the traffic and still deliver a
reasonable level of service. To overcome this limitation, the network is broken down into smaller
segments or subnets that can deliver good performance for the stations attached to that segment.
This segmentation solves the problem of supporting a large number of stations, but introduces
the problem of getting traffic from one subnet to another.
To accomplish this, devices called routers or gateways are placed between segments. If a
machine wishes to contact another device on the same segment, it transmits to that station
directly using a simple discovery technique. If the target station does not exist on the same
segment as the source station, then the source actually has no idea how to get to the target.