Firmware update, Restore default settings – Allied Telesis AT-ARW256E User Manual
Page 45

AT-ARW256E User’s Guide
45
5.6.3.2 Firmware Update
You can upgrade the Wireless ADSL Router’s firmware, clicking on Update Firmware under the
Tools page. This will bring up the screen shown in Figure 37.1. The upgrade file shall be in
*.img format.
To upgrade the firmware, click browse, find the firmware file to download. Make sure this is the
correct file. Click on upgrade firmware (as shown in Figure 37.1). Once the upgrade is complete
the Wireless ADSL Router will reboot. You will need to log back onto the Wireless ADSL Router
after the firmware upgrade is completed.
The firmware upgrade should take about 5 minutes to complete.
Note: Do not remove power from the Wireless ADSL Router during the firmware upgrade
procedure.
Figure 37.1 (Firmware Update screen)
5.6.3.3 Restore Default Settings
Restore Defaults: Use this button to restore factory default configuration.
NOTE: Connectivity to the router will be lost. You will be re-connected to the router after the unit
reboots.
Figure 37.2 (Restore Default Settings screen)