Allied Telesis AT-ARW256E - Manual (Page 38)

AT-ARW256E User’s Guide
38
5.4.6 LAN clients
To add a LAN client, click Advanced and under Advanced, select LAN Clients. If DHCP is used,
all DHCP clients are automatically assigned. If a fixed IP address server is on the LAN and you
want this server to be visible via the WAN, you must add its IP address. Once the IP address has
been added to you can apply Port Forwarding and Access Control rules to this IP address.
The apply button will temporarily save this connection. To make the change permanent you need
to click on Save Settings (at the side of the page). At the system commands page, click on Save
All.
Figure 30 (LAN Clients)