Allied Telesis AT-ARW256E - Manual (Page 44)

AT-ARW256E User’s Guide
44
5.6.3 User Management
5.6.3.1 HTTP Authentication
There are two types of user for this wireless router “Admin” and “Normal”. “Admin” user will be
have administrator rights which can have access to “Wizard”, “Basic” and “Advanced” tabs.
However for “Normal” user, they can have access to “Wizard”, “Basic” tabs.
You can change your Wireless ADSL Router’s username and password by clicking on User
Management. From here you can change the login name and password for Admin and Normal
User. You can also change the idle timeout; you will need to log back onto the Wireless ADSL
Router once the timeout expires.
If you forget your password, you can press and hold the reset to factory defaults button for 10
seconds (or more). The Wireless ADSL Router will reset to its factory default configuration and
all custom configurations will be lost.
The apply button will temporarily save this connection. To make the change permanent you need
to click on Save Settings (at the side of the page). At the system commands page, click on Save
All.
Figure 36 (HTTP Authentication screen)