Allied Telesis AT-ARW256E - Manual (Page 11)

AT-ARW256E User’s Guide
11
4.2 Quick Start
This screen appears when the user clicks on the Quick Start hyperlink.
The screen as shown in Figure 2.1 will be shown when the router detected that there is no DSL
line connected to the modem. Please follow the hint to rectify the problem.
Figure 2.1 (Quick Start Error page)
By default the Wireless ADSL Router has being configured to PPP connection and user would
only need to enter the username and password (as specified by the local ISP) to make
connection to the Internet.
The Quick Start page is meant for basic users whom only require easy and seamless connectivity
to the Internet without worrying about any other advance configuration setting. If you are in doubt
for what content to enter for the Protocol, VPI and VCI, please contact your Service Provider for
details.
Important:
After clicking on Connect, please be sure to “Save Settings” to register the username / password
or any other changes.
Figure 2.2 (Quick Start page)