beautypg.com

Enabling or disabling spanning tree – Allied Telesis AT-WA7400/NA User Manual

Page 92

background image

Chapter 8: Configuring Ethernet (Wired) Settings

92

Enabling or Disabling Spanning Tree

The AT-WA7400 Management Software allows you to enable or disable
spanning tree through both the wired and wireless interfaces.

To enable or disable spanning tree, perform the following procedure:

1. From the main menu, select Advanced > Ethernet (Wired) Settings.

The Ethernet (Wired) Settings page is shown in Figure 30 on page 88.

2. For the Spanning Tree Protocol setting, choose one of the following:

ˆ

Click Enabled to enable spanning tree.

ˆ

Click Disabled to disable spanning tree.