Allied Telesis AT-WA7400/NA - Manual (Page 239)

AT-WA7400 Management Software User’s Guide
239
Figure 14. Wireless Network Properties Dialog Box
4. Configure the following settings on the Association and Authentication
tabs in the Network Properties dialog box.
Network Authentication
WPA
Data Encryption
TKIP or AES depending on how this option is configured on the access
point.
Note
When the Cipher Suite on the access point is set to Both, then TKIP
clients with a valid TKIP key and AES clients with a valid CCMP
(AES) key can associate with the access point.
5. Configure this setting on the Authentication tab.
EAP Type
Choose Protected EAP (PEAP).
Choose either TKIP or AES for the
Data Encryption mode
Choose WPA
Choose Protected EAP (PEAP)
. . . then, click Properties
1 2