Allied Telesis AT-WA7400/NA - Manual (Page 229)

AT-WA7400 Management Software User’s Guide
229
2. Configure the following settings on the Association tab in the Network
Properties dialog box:
Network Authentication
Open
Data Encryption
WEP
Note
An RC4 stream cipher is used to encrypt the frame body and cyclic
redundancy checking (CRC) of each IEEE 802.11 frame. This is the
same encryption algorithm as is used for Static WEP; therefore, the
data encryption method configured on the client for this mode is
WEP.
This key is provided for me automatically
Enable (click to check) this option.
3. Configure this setting on the Authentication tab.
EAP Type
Choose Protected EAP (PEAP).