Allied Telesis AT-WA7400/NA - Manual (Page 34)

Chapter 2: Setting up the AT-WA7400 Management Software
34
Logging in to the AT-WA7400 Management Software
To access the AT-WA7400 management software, perform the following
procedure:
1. In the KickStart Administration dialog box, click Administration.
You are prompted for a user name and password, as shown in
Figure 12.
Figure 12. Login Dialog Box
The defaults for user name and password are:
Username
manager
Password
friend
Note
You cannot modify the user name.
2. Enter the username and password and click OK.
When you log in for the first time, the Basic Settings page is displayed,
as shown in Figure 13. This page displays the global settings for all
access points that are members of the cluster and, if you specify
automatic configuration, for any new access points that you add later.