Allied Telesis AT-WA7400/NA - Manual (Page 183)

183
Chapter 17
Maintenance and Monitoring
The maintenance and monitoring tasks described here all pertain to
viewing and modifying settings on specific access points; not on a cluster
configuration that is automatically shared by multiple access points.
Therefore, it is important to ensure that you are accessing the
management software web pages for the particular access point you want
to configure. For information on this, see Chapter 3, “Managing Access
Points and Clusters” on page 43.
This chapter contains the following sections:
ˆ “Monitoring Wired and Wireless LAN Settings” on page 184
ˆ “Viewing the Event Logs” on page 186
ˆ “Viewing the Transmit/Receive Statistics” on page 190
ˆ “Viewing the Associated Wireless Clients” on page 192
ˆ “Viewing the Status of Neighboring Access Points” on page 193
ˆ “Viewing System Information” on page 197
ˆ “Setting the Administrator Password” on page 199
ˆ “Enabling the Network Time Protocol (NTP) Server” on page 202
ˆ “Setting the HTTP Timeout” on page 204
ˆ “Rebooting the Access Point” on page 205
ˆ “Resetting the Configuration to Factory Defaults” on page 206
ˆ “Upgrading the Firmware” on page 207
ˆ “SNMP Firmware Upgrade” on page 209