Allied Telesis AT-WA7400/NA - Manual (Page 234)

Appendix B: Configuring Security on Wireless Clients
234
Enable IEEE 802.1x authentication for this network
Enable (click to check) this option.
EAP Type
Choose Smart Card or other Certificate.
Figure 11. Smart Card or other Certificate Properties Dialog Box
9. Click Properties to open the Smart Card or other Certificate
Properties dialog box and enable the “Validate server certificate”
option.
Validate Server Certificate
Enable this option (click to check the box).
Certificates
In the certificate list shown, select the certificate for this client.
10. Click OK on all dialog boxes to close them and save your changes.
11. To complete the client configuration you must now obtain a certificate
from the RADIUS server and install it on this client. For information on
how to do this see “Obtaining a TLS-EAP Certificate for a Client” on
page 253.
IEEE 802.1x clients should now be able to connect to the access point
using their TLS certificates. The certificate you installed is used when
you connect, so you will not be prompted for login information. The
Enable (click to check)
"Validate server certificate"
3
Select (check) the name of certificate
on this client (downloaded from
RADIUS server in a prerequisite procedure)