Allied Telesis AT-GS900/8E - Manual (Page 36)

Chapter 2: Installation
36
3. With the “u” of the clip facing up, press the sides of the clip toward the
center and insert the short ends into the holes in the retaining bracket,
as shown in Figure 10.
Figure 10. Inserting the Retaining Clip into the Retaining Bracket
4. Verify that the retaining clip is in the correct position, as shown in
Figure 11.
Figure 11. Retaining Clip Installed in the Retaining Bracket
100-240V
~
50-60Hz 0.6A
100-240V
~
50-60Hz 0.6A