Allied Telesis AT-S84 - Manual (Page 243)

AT-S84 Management Software User’s Guide
Section II: Web Browser Interface 243
The LACP Port Priority page opens, as shown in Figure 72.
Figure 72. LACP Port Priority Page
2. In the priority column, enter a priority number for the port(s).
3. Click Apply.
Verifying the
LACP Group
Settings
To verify the LACP group settings, perform the following procedure:
1. From the Advanced Config menu, select Trunk Config and then
LACP Group Status.
The LACP Group Status page opens, as shown in Figure 73.
Figure 73. LACP Group Status Page