Allied Telesis AT-CV1203 - Manual (Page 30)

Chapter 2: Installation
30
Unpacking the Chassis
To unpack the chassis, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Make sure that the following components are included in the package.
If any item is missing or damaged, contact your Allied Telesis sales
representative for assistance.
ˆ One AT-CV120x chassis with two AT-CV5PNL1 blank slot
covers installed
ˆ Four self-adhesive rubber feet
ˆ One AC power adapter
ˆ Documentation CD
ˆ Warranty card
3. Place the AT-CV120x chassis on a level, secure surface.