Allied Telesis AT-FS750/24POE - Manual (Page 38)

Chapter 2: Installation
38
Unpacking the Switch
To unpack the switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the switch on a level, secure surface.
3. Ensure that the following hardware components are included in your
switch package. If any item is missing or damaged, contact your Allied
Telesis sales representative for assistance.
One AT-FS750/24POE Fast Ethernet Smart switch and the following:
ˆ Two rack-mount brackets
ˆ Six rack-mount bracket screws
ˆ Four rubber feet (for desktop use)
ˆ One power cord
ˆ Documentation CD