Allied Telesis AT-FS750/24POE - Manual (Page 21)

AT-FS750/24POE Fast Ethernet Smart Switch Installation Guide
21
.
Figure 3. POE Port LEDs
10/100Base-T
Non-POE Port
LEDs
Ports 13 through 24 each have two LEDs as shown in Figure 3 and
described in Table 3
2
3
4
5
6
7
8
9
10 12
11 13
14
1
Table 3. 10/100Base-T POE Port LEDs
LED State Description
L/A Green A valid link has been established on the port.
Blinking
Green The port is transmitting or receiving data.
Off No link is established on the port.
100M Green A valid 100 Mbps link is established between
the uplink port and the end node.
Off A valid 10 Mbps link is established between
the port and the end node.
PoE Green A PoE powered device is connected and is
receiving power.
Blinking
Green PoE is off due to a failure on the POE
powered device.
Off A PoE powered device is not connected.