beautypg.com

Resetting the switch, Figure 22. resetting the switch – Allied Telesis AT-GS950/8 User Manual

Page 45

background image

AT-GS950/8 Gigabit Ethernet WebSmart Switch Installation Guide

45

Resetting the Switch

A recessed reset button is available for you to reset the switch. You may
need to reset the switch after you upgrade the AT-S82 software. The reset
button is located on the front of the switch.

To reset the system, perform the following procedure:

1. Locate the reset button on the front of the switch.

2. Press the reset button with the tip of a pen as shown in Figure 22.

Figure 22. Resetting the Switch

The switch runs some diagnostic tests. After the diagnostic tests are
complete, the switch reloads the AT-S82 software. The entire reset
process takes about 30 seconds to complete.

929