Allied Telesis AT-GS950/8 - Manual (Page 19)

AT-GS950/8 Gigabit Ethernet WebSmart Switch Installation Guide
19
LEDs
The LEDs on the front panel display system and port status information.
The system and port LEDs are show in Figure 2 and described in Table 2
and Table 3.
Figure 2. System and Port LEDs
System (Power) LED Port LEDs
914
Table 2. System LED
LED State Description
POWER Off The switch is not receiving power.
On The switch is receiving power.
Table 3. 10/100/1000Base-T Port LEDs
LED State Description
L/A
(LINK/ACT) Off The port has not established a link with an
end node.
Blinking
Green The port is transmitting or receiving data.
Green A valid link has been established on the
port.
SPD
(SPEED) On The port is operating at 1000 Mbps.
Off The port is operating at 10/100 Mbps or no
link is established.
DPX Off Indicates half-duplex mode.
On Indicates full-duplex or no connection.