beautypg.com

Figure 18. plugging in the ac power cord – Allied Telesis AT-GS950/8 User Manual

Page 42

background image

Chapter 2: Installation

42

Figure 18. Plugging in the AC Power Cord

2. Plug the other end of the power cord into a wall outlet.

3. Verify that the POWER LED is green.

If the LED is OFF, refer to “Checking the POWER LED” on page 48.

The switch is now powered on and ready for network operations. To
start a remote management session on the switch, refer to “Starting a
Remote Management Session” on page 43.

927

Warning: Power cord is used as a disconnection device. To de-
energize equipment, disconnect the power cord. E3

Pluggable Equipment. The socket outlet shall be installed near
the equipment and shall be easily accessible. E5