Allied Telesis AT-GS950/8 - Manual (Page 43)

AT-GS950/8 Gigabit Ethernet WebSmart Switch Installation Guide
43
Starting a Remote Management Session
To establish a web browser management session with an AT-GS950/8
switch, the switch has an assigned an IP address. If the switch is part of an
enhanced stack, such as a slave switch, start the web browser
management session on the stack’s master switch. After you have started
the session, you can access and manage all of the switches in the stack
from the master switch.
Note
For more information about the AT-S82 software, see the AT-S82
Management Software User’s Guide.
To start a web browser management session, perform the following
procedure:
1. Start your web browser.
Note
If your PC with the web browser is on the same side of a firewall as
the switch, you must configure your browser’s network options to not
allow proxies. Consult your web browser’s documentation.
2. Enter the default IP address, 192.168.1.1, of the AT-GS950/8 switch in
your web browser. See Figure 19.
Figure 19. Entering a Switch’s IP Address in the URL Field
Switch’s IP Address