Allied Telesis AlliedView-EMS 4.0.1 QoS MANAGER - Manual (Page 60)

6.5.4.1 Modify Ports
Property Name Description Valid Values
Ingress Specifies the Ingress policy to
associate with the port
Select from a list of available Policy
IDs
Egress Specifies the Egress policy to
associate with the port
Select from a list of available Policy
IDs
6.5.6 Scheduling
Column Name Description Value
Scheduling Specifies the scheduling method to
use.
• Strict - higher priority
queues are emptied before
any packets are transmitted
from lower priority queues
• WRR - packets are
transmitted from all queues
in a round-robin fashion
based on the queue weights
Q0-Q7 Specifies the maximum latency in
microseconds between packet
transmissions for the specified CoS
queue.
Range: 1-15
6.5.7 Quick Setup
Property Name Description Valid Values
Source UDP Port Specifies the UDP source port of a
UDP/IP packet.
Range: 0-65535
Default for VOICE: 1719
Default for VIDEO: 1024
Priority Specifies the priority that will be
assigned for this setup. Range: none, 0-7
Default for VOICE: 7
Default for VIDEO: 4
Maximum
Bandwidth
Specifies the maximum bandwidth
available to this setup.
• 0-16000000 kbps
• 0-16000 Mbps (decimal point
supported)
• 0-16 Gbps (decimal point
supported)
Default for VOICE: 128kbps
Default for VIDEO: 256kbps
Port Assignment Specifies a list of ports that will be
affected by this setup.
Select from a list of available Ports.
Default for VOICE: no ports
Default for VIDEO: no ports
AlliedView™-EMS 4.0.1 QoS Manager User’s Guide Page 60 of 146