Allied Telesis AlliedView-EMS 4.0.1 QoS MANAGER - Manual (Page 135)

AlliedView™-EMS 4.0.1 QoS Manager User’s Guide Page 135 of 146
Column Name Description Valid Values
(cannot be
modified)
available.
Max Packets
Maximum number of packets able to
be transmitted from this queue
before the control is passed to the
next queue.
Range: 0-255
Max Latency
Maximum permissible elapsed time
between packets transmitted from
this queue.
Range: 0, 16-4080
6.9.7 Quick Setup
Property Name Description Valid Values
Source UDP Port Specifies the UDP source port of an
UDP/IP packet.
Range: 0-65535 or a port range (n-
m).
Default for VOICE: 1719
Default for VIDEO: 1024
Priority Specifies the priority that will be
assigned for this setup.
Range: none, 0-7
Default for VOICE: 7
Default for VIDEO: 4
Maximum
Bandwidth Specifies the maximum bandwidth
available to this setup. • 0-16000000 kbps
• 0-16000 Mbps (decimal point
supported)
• 0-16 Gbps (decimal point
supported)
Default for VOICE: 128kbps
Default for VIDEO: 256kbps
Port Assignment Specifies a list of ports that will be
affected by this setup.
Select from a list of available Ports.
Default for VOICE: no ports
Default for VIDEO: no ports
6.9.8 Notes
• The current firmware version only allows values in the range [0-255] inclusive for
the ICMP Type and ICMP Code classifier properties.
• Values entered for the Max Bandwidth traffic class property are rounded to the
nearest 1000kbps.
• If the software release version is 2.9.1-12 and lower: Valid values for the PPP Index
classifier property are in the range [0-1024] inclusive for the CLI and [0-1023]
inclusive for QoS Manager. As such, setting a classifier's PPP Index property to 1024
using the CLI will result in an error message appearing when an attempt is made to
modify that classifier through QoS Manager.