Allied Telesis AlliedView-EMS 4.0.1 QoS MANAGER - Manual (Page 120)

AlliedView™-EMS 4.0.1 QoS Manager User’s Guide Page 120 of 146
Property
Name
Description Valid Values
unclassified traffic is sent when
the default traffic class action is
sendvlanport. The port must
belong to the VLAN specified by
the VLAN parameter.
the following values:
• port 1 - n (n = number of ports
available)
• none
VLAN Specifies the VLAN where
unclassified traffic is sent when
the default traffic class action
issendvlanport. Traffic is sent
over the port specified by the
port parameter so the VLAN
must contain that port.
This can be set by selecting from a list of
available VLANs.
Traffic Class
List
Specifies a list of the Traffic
Classes currently assigned to this
Policy.
Select from a list of available Traffic Class
IDs.
6.8.5 Ports
Column Name Description Valid Values
Port
(cannot be
modified)
Lists the ports available Available ports will depend on the
device model
Policy Specifies the policy to associate with
the port
Select from a list of available policies
6.8.6 Scheduling
Column Name Description Valid Values
Port
(cannot be
modified)
Specifies the port ID. This can be set by selecting any one
of the following values:
• port 1 - n (n = number of
ports available)
• none
Max Bandwidth Specifies the maximum bandwidth
permitted on the port.
This value can be set by entering a
number from 0-16000000.
Alternatively a value from 0-
16000Mbps can be specified.
0-16Gbps can also be specified.
Scheduler Specifies the method by which
frames on each egress queue is
allocated bandwidth for
transmission onto the line.
• Strict
• WRR1
• WRR2