Allied Telesis AlliedView-EMS 4.0.1 QoS MANAGER - Manual (Page 18)

4.5 Apply
QoS/Cos configuration changes made through Add/Modify/Delete operations or Inline
Table Editing will not be immediately reflected on the device. QoS Manager just stores
these changes locally until an Apply operation is performed.
To apply QoS/CoS configuration changes to the device, click on the Apply button.
As a safety measure, before the operation is performed, you will be asked to confirm the
action.
During the operation, a progress window will be displayed to indicate the status of the
operation. At any point in time, you may cancel the operation by clicking the Cancel button.
AlliedView™-EMS 4.0.1 QoS Manager User’s Guide Page 18 of 146