Allied Telesis AlliedView-EMS 4.0.1 QoS MANAGER - Manual (Page 139)

AlliedView™-EMS 4.0.1 QoS Manager User’s Guide Page 139 of 146
Property Name Description Valid Values
This can also be set by entering a 2-
byte hexadecimal value (0000-FFFF).
Destination IPX
Socket
Specifies the destination IPX socket
number of an IPX packet.
This can be set by selecting any of
the following values:
• NCP
• SAP
• RIP
• NNB
• DIAG
• NLSP
• IPXWAN
• any
This can also be set by entering a 2-
byte hexadecimal value (0000-FFFF).
MAC Type Specifies whether the packet is a
Layer 2 unicast (L2UCAST) or any
other packet (L2BMCAST).
• L2UCAST
• L2MBCAST
• any
Protocol Specifies the protocol of the packet. This can be set by selecting any of
the following values:
• IP
• IPX
• NONIPIPX
• SNA PATH CONTROL
• PROWAY-LAN
• EIA-RS
• PROWAY
• IPX 802.2
• NETBEUI
• ISO CLNS IS
• IP ETHII
• X.75 INTERNET
• NBS INTERNET
• ECMA INTERNET
• CHAOSNET
• X.25 LEVEL 3
• ARP
• XNS COMPAT
• BANYAN SYSTEMS
• BBN SIMNET
• DEC MOP DUMP/LD
• DEC MOP REM CONS
• DEC DECNET