Allied Telesis AlliedView-EMS 4.0.1 QoS MANAGER - Manual (Page 49)

AlliedView™-EMS 4.0.1 QoS Manager User’s Guide Page 49 of 146
Property Name Description Valid Values
Mark Value This parameter specifies a
replacement value to write into the
DSCP (TOS) field for all packets.
Range: none, 0-63
Priority This parameter specifies the priority
that traffic belonging to this Flow
Group has.
Range: none, 0-7
Remark Priority Specifies whether the value of the
priority parameter is used to set the
egress queue selection for a frame
and also to replace the 802.1p
priority value in the frame, or just
to select the egress queue for the
frame.
• yes
• no
Classifier List Specifies a list of the Classifiers
currently assigned to this Flow
Group.
Select from a list of available
classifier IDs.
6.3.3 Traffic Classes
6.3.3.1 QoS Information Window
Column Name Description
Traffic Class ID Lists the ID of Traffic Classes available
Description A brief description of the Traffic Class
Flow Groups List of the Flow Groups associated with this Traffic
Class
6.3.3.2 Add/Modify Traffic Class
Property Name Description Valid Values
Traffic Class ID
(cannot be
modified)
Specifies the unique identifier for
this Traffic Class.
Range: 0-511
Description Specifies a brief description of the
Traffic Class.
To set this value, enter an
alphanumeric string from 1-15
characters.
Exceed Action Specifies the action to take if the
traffic classes maxbandwidth is
exceeded.
• drop
• remark
Exceed Remark
Value
Specifies the DSCP replacement
value for traffic that exceeds the
maxbandwidth.
Range: 0-63
Mark Value Specifies a replacement value to
write into the DSCP (TOS) field for
all packets.
Range: none, 0-63
Maximum Specifies the maximum bandwidth This can be set by entering a value