Allied Telesis AlliedView-EMS 4.0.1 QoS MANAGER - Manual (Page 45)

AlliedView™-EMS 4.0.1 QoS Manager User’s Guide Page 45 of 146
Property Name Description Valid Values
• 802.2
• 802.2-Tagged
• 802.2-Untagged
• EthII
• EthII-Tagged
• EthII-Untagged
• NetwareRaw
• NetwareRaw-Tagged
• NetwareRaw-Untagged
• SNAP
• any
Source IP
Address Specifies the source IP Address
(either host or host/subnet) of an IP
packet.
This can be set by entering an IP
Address in dotted decimal notation
with an optional mask
• NNN.NNN.NNN.NNN
• NNN.NNN.NNN.NNN/M
Where M = 0-32
Destination IP
Address
Specifies the destination IP Address
(either host or host/subnet) of an IP
packet.
This can be set by entering an IP
Address in dotted decimal notation
with an optional mask
• NNN.NNN.NNN.NNN
• NNN.NNN.NNN.NNN/M
Where M = 0-32.
IP DSCP This the Code Point bits of the
DiffServ field of an IP packet. This can be set by entering one or
more integers from 0-63. Input can
be a comma separated list or a
range (specified as m-n) or a
combination of both. (e.g. 2, 4-7)
This value can also be set to "any".
IP Protocol This specifies a Layer 4 IP protocol
of an IP packet.
This can be set by selecting any of
the following values:
• TCP
• UDP
• ICMP
• IGMP
• any
This can also be set by entering an
integer from 0-255.