Allied Telesis AT-FS750/24POE - Manual (Page 41)

AT-FS750/24POE Fast Ethernet WebSmart Switch Installation Guide
41
Installing the Switch on a Wall
The AT-FS750/24POE WebSmart Fast Ethernet Switch can be mounted
vertically on a wall using the two mounting brackets, screws, and anchors
provided in the accessory kit.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
To wall-mount the switch, perform the following procedure:
1. Place the unit on a level, secure surface.
2. Attach a mounting bracket to one side of the switch using four Phillips
head screws that come with the switch, as shown in Figure 8.
Figure 8. Attaching Brackets for Wall Mounting
3. Install the second mounting bracket on the other side of the switch
using the four remaining Phillips head screws.
24 Port 10/100 Mbps
WebSma
rt Switc h
with 12 PO
E and 2 Combo SFP
Ports
1759