Allied Telesis AT-MC1008/SP - Manual (Page 25)

AT-MC1008 Series Installation Guide
25
MODE push button LEDs
The MODE push button LEDs indicate the operating status of the three
operation modes: Link Test (LT), MissingLink (ML), and Smart
MissingLink (SML). Refer to Figure 7 on page 23 for the location of these
LEDs. Each AT-MC1008 Series converter contains three MODE push
button LEDs: ML, SML, and LT; as defined in Table 6.
Table 6. MODE Push Button LEDs
LED Color Description
ML Green MissingLink mode is enabled.
Off MissingLink mode is disabled.
SML Green Smart MissingLink mode is enabled.
Off Smart MissingLink mode is disabled.
LT Green Link Test mode is enabled.
Off Link Test mode is disabled.