Allied Telesis AT-MC102XLPCI - Manual (Page 26)

Chapter 2: Installation
26
Note
Store the packaging material in a safe location. If you need to return
the unit to Allied Telesis, you may re-use the packing material.
2. Make sure the following items are included in your package. If any
item is missing or damaged, contact your Allied Telesis sales.
3. Holding the AT-MC102XLPCI by the edges, remove it from its shipping
package and place it on an antistatic surface.
4. Check the media converter for visible signs of damage, particularly on
the card’s edge connector.
Caution
Do not attempt to install a damaged AT-MC102XLPCI media
converter. If it is damaged, contact Allied Telesis.
Table 4. AT-MC102XLPCI 100Mbps Media Converter Items
Component Description
One AT-MC102XLPCI
100Mbps Media Converter
with factory-installed low
profile bracket
One standard profile PCI
bracket