Acnodes PC 6170 - Manual (Page 65)

PC 6170 User’s Manual
A.6 PnP/PCI Configuration Setup
This section describes configuring the PCI bus system. PCI, or
Personal Computer Interconnect, is a system which allows I/O
devices to operate at speeds nearing the speed the CPU itself uses
when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that
only experienced users should make any changes to the default
settings.
CMOS Setup Utility-Copyright © 1984-2001 Aw ard Softw are
PnP/PCI Configurations
Reset Co n figuration Da ta Di sabled Item He lp
Resources Contro lled By Auto (ES CD)
Menu Level f
►IRQ Re sources Press Ente r Se lect Ye s if yo u are
using a Plug and play
capable operating
system select No if
P CI/VGA Pa lett e Snoop Di sabled you need the BIOS to
configure non-boot
devices
ЗИ ЖЕ : Mo ve E n te r: S e le ct +/- / P U /P D : Va lu e F 1 0 : S a ve E S C : E xi t F 1 :
Gene ral He lp
F 5 : P r evious Values F6: Fail- Saf e D e f a ults F7: O p timize d D e f a ults
PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play aware
(e.g., Windows 95). The default value is “No”.
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup or if you have
installed a new add-on and the system reconfiguration has caused such a
serious conflict that the operating system can not boot. The options
available are Enabled and Disabled.
SBC83810 BIOS Setup 57