Acnodes PC 6170 - Manual (Page 62)

PC 6170 User’s Manual
Video Off After
As the system moves from lesser to greater power-saving modes, select
the mode in which you want the monitor to blank off. The default value is
“Standby”.
NA System BIOS will never turn off the screen
Suspend Screen off when system is in SUS PEND mode
Standby Screen off when system is in STANDB Y mode
Doze Screen off when system is in DOZE mode
NO T E : Gre en mon itor s de te ct t h e V/H SYNC si gnal s to turn of f it
s el ectr on gun
Modem Use IRQ
3, 4, 5, 7, 9,
10, 11, NA
Doze Mode
For external modem, 3 or 4 will be used for card
type modem . It is up to card definition. Default is
3.
After the selected period of system inactivity (1 minute to 1 hour), the
CPU clock runs at slower speed while all other devices still operate at full
speed. The default value is “Disabled”.
Disabled System will never enter doze mode
1/2/4/6/8/10/20/30/4
0 Min/1 Hr
Standby Mode
Defines the continuous idle ti me before
the system entering DOZE m ode.
After the selected period of system inactivity (1 minute to 1 hour), the
fixed disk drive and the video shut off while all other devices still operate
at full speed. The default value is “Disabled”.
Disabled System will never enter STANDBY mode
Defines the continuous idle time before the
1/2/4/6/8/10/20/
30/40 Min/1 Hr
Suspend Mode
system entering STANDB Y mode.
If any item defi ned in (J) i s enabled & active,
S TANDBY timer will be reloaded
After the selected period of system inactivity (1 minute to 1 hour), all
devices except the CPU shut off. The default value is “Disabled”.
Disabled System will never enter SUSPEND mode
54 SBC83810 BIOS Setup